Home › Forums › Software › FCE/G Configurations

Viewing 1 reply thread
  • Author
    Posts
    • OB_DCOB_DC
      Participant
      September 27, 2024 at 4:44 am
      Post count: 3
      #18956

      Hello Team,

      I am working on FCE ADC configurations and am facing an issue with the ADC physical channel Id. I am not able to find the ADC physical channel Id in S32 Config tool for the following,
      1) High side Output 8 feedback(ADC0_MA2)
      2) High side output 9 feedback(ADC1_MA0),
      Kindly look into this and help me out for the following.

      Attachments:
      You must be logged in to view attached files.
    • AmirFAmirF
      Moderator
      October 4, 2024 at 12:37 pm
      Post count: 25
      #18986

      Unfortunately, the feedback ADCs for high-side outputs from 8 to 10 are unusable on ADC_MA channels. This is a bug on FCE2.0 and is resolved in the next versions.

      As a workaround for feedback for HSO9/10 ADC, you can use another ADC channel ID available on that pin(ADC1_S18). Just ensure the secondary channel ID is not being used on any other physical pin.

      Unfortunately, there is no workaround for the feedback pin for HSO7/8.

      Thanks,
      Amir

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.