Home › Forums › Software › Flexcase G Bootloader Restore

Viewing 1 reply thread
  • Author
    Posts
    • mathewgrabaumathewgrabau
      Participant
      February 6, 2025 at 4:20 am
      Post count: 3
      #19351

      Hello,

      I believe my bootloader has become corrupted. I can connect via JTAG, but the FlexCaseFlash no longer connects. I have confirmed that CAN communication works correctly when I run an application via S32DS/PEMicro; it hits the system_reset call. When debugging, I can see the application at it’s designated address, but the start address/sector(s) are in their erase state (0xFFFFFFFF).

      I found the srec files for the 142/144 bootloaders on the downloads page, but I didn’t see one for the 344 (G).

      Thanks,
      Mathew

    • ConnorConnor
      Keymaster
      February 7, 2025 at 1:59 pm
      Post count: 31
      #19355

      Hi Mathew,

      Did you flash your application software over CAN or over JTAG?

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.