[Rishabh]

in reply to: Freemaster over CAN in FCE-G #18928

PFA

Attachments:

You must be logged in to view attached files.

[Rishabh]

in reply to: Freemaster over CAN in FCE-G #18926

Hello Connor,

I have a attached a mex file which is for Freemaster over CAN, working on FCE/FCG CAN0 & CAN4 and I have tested it already. We need freemaster over CAN working on CAN1, CAN2, CAN3 & CAN5 as it is working on CAN0 & CAN4. I have tried out many ways for this to work maybe you can review this and let us know the potential problems. As I was checking the configuration I came across these pins CAN_EN, CAN_STB & CAN_ERRN and need to know how this pins work and why are they configured in the configuration for CAN0 & CAN4 on which freemaster over CAN works. Are there any similar pins for CAN1, CAN2, CAN3 & CAN5.

Attachments:

You must be logged in to view attached files.

[Rishabh]

in reply to: Freemaster over CAN in FCE-G #18684

Hello Audesse Team,

I am testing freemaster over Peak CAN and I am facing some issues. I have done the configuration for CAN1 & CAN2. On default Software settings from nxp MBDT for CAN0 & CAN4, I am able to use freemaster over peak CAN over CAN0 but not for CAN1, CAN2 or CAN4. I have done the following:-

1. Added the flexcan0, flexcan2 & Flexcan1 in default CAN0 config which enables the freemaster use over peak CAN, but configuring CAN0, CAN1 or CAN2 manually does not work for freemaster.
2. Hardware objects are configured for both transmission and reception.
3. Also the Pins and ports have been added for the respective pins according to the datasheet.

Is there some any further configurations which i need to do for this to work.

Thanks,
Rishabh

Attachments:

You must be logged in to view attached files.

[Rishabh]

in reply to: Freemaster over CAN in FCE-G #18682

Hello Audesse Team,

I am testing freemaster over Peak CAN and I am facing some issues. I have done the configuration for CAN1 & CAN2. On default Software settings from nxp MBDT for CAN0 & CAN4, I am able to use freemaster over peak CAN over CAN0 but not for CAN1, CAN2 or CAN4. I have done the following:-

1. Added the flexcan0, flexcan2 & Flexcan1 in default CAN0 config which enables the freemaster use over peak CAN, but configuring CAN0, CAN1 or CAN2 manually does not work for freemaster.
2. Hardware objects are configured for both transmission and reception.
3. Also the Pins and ports have been added for the respective pins according to the datasheet.

Is there some any further cofigurations which i need to do for this to work.

Thanks,
Rishabh

Attachments:

You must be logged in to view attached files.

[Author]

Posts