Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • saieshsinghhansbhadaysaieshsinghhansbhaday
    Participant
    October 10, 2024 at 8:01 am
    Post count: 6
    in reply to: Freemaster over CAN in FCE-G #19017

    I am using MBDT 1.5 for the S32k3x4. I have build a simple model with a couple of transmit and receive messages over CAN 0 module and have configured freemaster over the same. After flashing the SW on the target HW initially i am able see the messages over the bus(delay and drop in message periodicity observed), but the moment i establish a connection over FreeMaster over CAN 0, the message transmission and reception over the bus is halted and is restored only after resetting the VCU. Also not able to establish connection over FreeMaster using any other CAN channel except for CAN0 and CAN4.

    Attachments:
    You must be logged in to view attached files.
    saieshsinghhansbhadaysaieshsinghhansbhaday
    Participant
    January 30, 2024 at 8:43 am
    Post count: 6
    in reply to: Application Development on C (HW and Pin details requirement) #17196

    Hello Connor,

    Yes I am referring to linker from FlexCase Flash. Can you please confirm?

    Thanks

    saieshsinghhansbhadaysaieshsinghhansbhaday
    Participant
    January 11, 2024 at 6:27 am
    Post count: 6
    in reply to: CAN Flashing on a Different CAN channel #17096

    Hi Amir,

    We need flash over CAN for both the devices on CAN3. Please let me know if this is possible.

    Thanks,
    Saiesh

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)